Hello All !
Problem:
Nach einem Netzteildefekt (made in China, interner Aufbau ein Witz und nun gegen ein „normales“ getauscht) macht meine Festplatte von Zeit zu Zeit (ca. einmal pro Tag) „tack - tack - tack - tack -tack …“ ca. 10-20 mal. Davor bricht die Performance komplett ein (CPU (Quadcore) unter Volllast) und auch während dem „tackern“ geht nichts (in Summe ca. 1 Minute).
Ansonst gibt es keine sichtbaren Probleme.
Meines Wissens dient dieses Verhalten einer Adjustierung des Schreib-/Lesekopfes durch mehrfaches „anschlagen“.
Meine Fragen:
Hat das jetzt Auswirkungen auf die Lebensdauer ?
Ist das ein Anzeichen, dass sie bald den Geist aufgibt ?
Droht Datenverlust ? (etwaige kaputte Sektoren können ja maskiert werden)
Lieber gleich tauschen ? (ist nur mein privat PC - Standzeit fast egal)
Thanks,
Penguin
- Sicherungen gabe es davor ausreichend (und jetzt natürlich vermehrt).
- Den Netzteildefekt habe ich nicht sofort erkannt und daher 2-3 mal gebootet mit Komplett-Absturz. Das Filesystem könnte daher (noch) inkonsistent sein.
- Operating System ist LINUX, Filesystem Ext2 und Reiser
Hardware:
P: /block/sda
N: sda
S: disk/by-id/scsi-SATA_SAMSUNG_HD501LJS0MUJDPPB01792
S: disk/by-id/ata-SAMSUNG_HD501LJ_S0MUJDPPB01792
S: disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
S: disk/by-id/edd-int13_dev80
E: DEVTYPE=disk
E: ID_VENDOR=ATA
E: ID_MODEL=SAMSUNG_HD501LJ
E: ID_REVISION=CR10
E: ID_SERIAL=SATA_SAMSUNG_HD501LJS0MUJDPPB01792
E: ID_SERIAL_SHORT=S0MUJDPPB01792
E: ID_TYPE=disk
E: ID_BUS=scsi
E: ID_ATA_COMPAT=SAMSUNG_HD501LJ_S0MUJDPPB01792
E: ID_PATH=pci-0000:00:1f.2-scsi-0:0:0:0
E: ID_EDD=int13_dev80
Kernel-Messages:
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:43:c6:c1/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:43:c6:c1/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:43:c6:c1/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:43:c6:c1/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x25
ata3.00: cmd c8/00:08:43:c6:c1/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:08:43:c6:c1/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 c1 c6 43
sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 12699203
ata3: EH complete
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA