hallo linux gemeinde
ich habe ein kleines problem mit meinem Onstream DI30 unter Linux SuSE 8.0
ich habe das Laufwerk als ide-tape eingebunden.
sobald ich das module ide-tape lade,zeigt er mir unter folgendes an
ATAPI
ide-tape: Device Type: 1 - Streaming Tape Device
ide-tape: Removable: Yes
ide-tape: Command Packet DRQ Type: Accelerated DRQ
ide-tape: Command Packet Size: 12 bytes
ide-tape: Model: OnStream DI-30
ide-tape: Firmware Revision: 1.09
ide-tape: Serial Number:
ide-tape: Write buffer size: 159744 bytes
ide-tape: DMA: Yes
ide-tape: LBA: No
ide-tape: IORDY can be disabled: No
ide-tape: IORDY supported: Yes
ide-tape: ATAPI overlap supported: No
ide-tape: PIO Cycle Timing Category: 2
ide-tape: DMA Cycle Timing Category: 0
ide-tape: Single Word DMA supported modes:
ide-tape: Multi Word DMA supported modes: 0 1 2 (active)
ide-tape: Enhanced PIO Modes: Mode 3
ide-tape: Minimum Multi-word DMA cycle per word: 120 ns
ide-tape: Manufacturer’s Recommended Multi-word cycle: 120 ns
ide-tape: Minimum PIO cycle without IORDY: 120 ns
ide-tape: Minimum PIO cycle with IORDY: 120 ns
hdd: no flushcache support
ide-tape: hdd ht0: OnStream DP-30 rev 1.09
ide-tape: Dumping the results of the MODE SENSE packet command
ide-tape: Mode Parameter Header:
ide-tape: Mode Data Length - 23
ide-tape: Medium Type - 218
ide-tape: Device Specific Parameter - 16
ide-tape: Block Descriptor Length - 0
ide-tape: Capabilities and Mechanical Status Page:
ide-tape: Page code - 42
ide-tape: Page length - 18
ide-tape: Read only - No
ide-tape: Supports reverse space - No
ide-tape: Supports erase initiated formatting - No
ide-tape: Supports QFA two Partition format - No
ide-tape: Supports locking the medium - Yes
ide-tape: The volume is currently locked - No
ide-tape: The device defaults in the prevent state - No
ide-tape: Supports ejecting the medium - Yes
ide-tape: Supports error correction - Yes
ide-tape: Supports data compression - No
ide-tape: Supports 512 bytes block size - No
ide-tape: Supports 1024 bytes block size - No
ide-tape: Supports 32768 bytes block size / Restricted byte count for PIO transf
ers - Yes
ide-tape: Maximum supported speed in KBps - 1048
ide-tape: Continuous transfer limits in blocks - 1
ide-tape: Current speed in KBps - 990
ide-tape: Buffer size - 2097152
ide-tape: Adjusted block size - 32768
ide-tape: hdd ht0: Tape length 14429MB (19239 frames/track, 24 tracks = 4617
36 blocks, density: 64Kbpi)
ide-tape: 32KB play back: Yes
ide-tape: 32.5KB play back: No
ide-tape: 32KB record: Yes
ide-tape: 32.5KB record: No
ide-tape: hdd ht0: 990KBps, 64*32kB buffer, 10208kB pipeline, 60ms tDSC