Hallo,
mein Mainboard ( Elitegroup L7VMM3) erkennt die Grafikkarte nicht. Bei der Karte handelt es sich um eine Leadtek WinFast 350 XT TDH mit 128MB RAM, 256bit, 8x AGP.
Wie es scheint wird diese Karte gar nicht erst vom Mainboard angesprochen, da sich der Lüfter der Karte nicht dreht. Das Stromkabel ist natürlich ordnungsgemäß angebracht und ich habe testweise auch mal alle „unnötigen“ Peripherien abgeschlossen. Das Netzteil sollte mit 350W ausreichend sein.
Die Angaben im BIOS habe ich entsprechend geäündert (Primary VGA Adaptor: AGP).
Nachfolgend sind Informationen aus SiSoftware Sandra über mein System:
System
Manufacturer : ECS
Model : L7VMM3
Version : 3.1
Serial Number : 00000000
ID : 00000000-00000000-00000000-00000000
System Chassis
Manufacturer : ECS
Type : Desktop
Can be locked : No
Version : 3.1
Serial Number : 00000000
Asset Tag : 0123ABC
Mainboard
Manufacturer : ECS
MP Support : No
Model : L7VMM3
Version : 3.1
Serial Number : 00000000
System BIOS : 62-1225-001131-00101111-040201-VIA
Memory Controller
Error Detection Method : ECC
Error Correction Capability : 1-bit
Supported/Current Memory Interleave : 1-way / 1-way
Number of Memory Slots : 4
Maximum Installable Memory : 4096MB
Maximum Module Size : 1024MB
Supported STD/FPM/(B)EDO Speeds : 70ns, 60ns
Supported Memory Types : STD, FPM, EDO, Parity, ECC, SIMM
Supported Memory Voltages : +3.3V
Physical/BIOS Memory Banks
DIMM1 : Empty
DIMM2 (RASL-3 RASL-2) : 512MB DIMM SDRAM single-bank
DIMM3 : Empty
DIMM4 : Empty
Chipset 1
Model : VIA Technologies Inc VT8375 ProSavageDDR PM266/KM266 CPU to PCI Bridge
Bus(es) : ISA AGP PCI USB FireWire/1394 i2c/SMBus
Front Side Bus Speed : 2x 100MHz (200MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 133MHz / 2x 133MHz
Width : 64-bit
IO Queue Depth : 4 request(s)
Chipset 1 Hub Interface
Type : V-Link
Width : 8-bit
Full Duplex : Yes
Multiplier : 1/1x
Speed : 4x 50MHz (200MHz data rate)
IO Queue Depth : 9 request(s)
Logical/Chipset 1 Memory Banks
Bank 2 : 512MB DDR-SDRAM 2.5-3-3-7CL 2CMD
Shared Memory : 32MB
Bank Interleave : 2-way
Speed : 2x 100MHz (200MHz data rate)
Multiplier : 1/1x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No
Memory Module(s)
Memory Module 2 : 512MB 8x(64Mx8) DDR-SDRAM PC2100U-2533-750 (CL2.5 up to 133MHz) (CL2 up to 100MHz)
Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No
Temperature Sensor(s)
Board Temperature : 38.0°C / 100.4°F
CPU Temperature : 30.0°C / 86.0°F
Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 5114rpm
Voltage Sensor(s)
CPU Voltage : 1.36V
Aux Voltage : 2.54V
+3.3V Voltage : 3.28V
+5V Voltage : 5.32V
+12V Voltage : 11.79V
-12V Voltage : -11.70V
-5V Voltage : 1.63V
Standby Voltage : 5.16V
Battery Voltage : 2.03V
AGP Bus(es) on Hub 1
Version : 2.00
Speed : 4x 50MHz (200MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : No
Side Band Enabled : No
Side Band Support : Yes
Aperture Size : 64MB
PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (25MHz)
Multiplier : 1/4x
LPC Hub Controller 1
Model : VIA Technologies Inc VT8235 PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Multiplier : 1/4x
Speed : 6MHz
DMA Multiplier : 1/2x
DMA Speed : 3MHz
USB Controller 1
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 3
Model : VIA Technologies Inc VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 4
Model : VIA Technologies Inc VT6202 USB 2.0 Enhanced Host Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 6
Companion Controllers : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No
FireWire/1394 Controller 1
Model : VIA Technologies Inc VT6306 VIA Fire II IEEE-1394 OHCI Link Layer Controller
Version : 1.00
Interface : OHCI
Enhanced Support : No
Channels : 64
Speed : 100MHz
System SMBus Controller 1
Model : VIA VT823x SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 16kHz
Expansion Slot(s)
PCI1 (1h) : PCI 32-bit +3.3V Shared PME Full-Length Available (VIA Technologies Inc VT8633 Apollo Pro 266 CPU to AGP Controller)
PCI2 (2h) : PCI 32-bit +3.3V Shared PME Full-Length Used
PCI3 (3h) : PCI 32-bit +3.3V Shared PME Full-Length
PCI4 (4h) : PCI 32-bit +3.3V Shared PME Full-Length
PCI5 (5h) : PCI 32-bit +3.3V Shared PME Full-Length
ISA1 (6h) : ISA 16-bit +3.3V Shared PME Full-Length
ISA2 (7h) : ISA 16-bit +3.3V Shared PME Full-Length
Port Connector
USB - Def : SSA SCSI - Mini Centronics / DB-25 pin male
Für jeden Hinweis wäre ich sehr dankbar,
Michael.
