Hallo,
Ich hab heute das opensuse linux auf einen alten PC installiert, hab meinen Wlan stick angesteckt, aber ich weiss nicht wie ich den in die Netzwerkkonfiguration bringe, erkannt ist er geworden, aber das licht leuchtet nicht blau.
Gruß Michael
Hallo Michael,
Ich hab heute das opensuse linux auf einen alten PC
installiert, hab meinen Wlan stick angesteckt, aber ich weiss
nicht wie ich den in die Netzwerkkonfiguration bringe, erkannt
ist er geworden, aber das licht leuchtet nicht blau.
Normalerweise über Yast -> Netzwerkgeräte -> Netzwerkkarte
http://de.opensuse.org/YaST/Netzwerkger%C3%A4te/Netz…
Viel Erfolg
Marvin
Wenn ich das mache, dann geht das immer noch nicht. Müsste ich nicht auch irgendwo auswählen welche Karte ich konfigurieren will?
Gruß Michael
[Bei dieser Antwort wurde das Vollzitat nachträglich automatisiert entfernt]
Hallo Michael,
Wenn ich das mache, dann geht das immer noch nicht. Müsste ich
nicht auch irgendwo auswählen welche Karte ich konfigurieren
will?
Dazu müsste den genauen Chipsatz des Sticks kennen.
lspci -nn aus einer konsole bitte mal zeigen und den output von dmesg auch gleich mal.
Falls das ein Marvell Chipatz brauchst du den ndiswrapper.
Gruß Norbert
Hab im Internet noch ein bisschen rumgesucht, und den ndiswrapper schon installiert und den treiber. Wie kann ich das jetz einstellen mit den iwconfig oder so ähnlich, bin neuling bei linux, also ich kenn mich noch nich so aus.
[Bei dieser Antwort wurde das Vollzitat nachträglich automatisiert entfernt]
Hab vergessen zu Fragen, soll ich das ganze output von dmesg reintun?
Gruß Michael
[Bei dieser Antwort wurde das Vollzitat nachträglich automatisiert entfernt]
Hab im Internet noch ein bisschen rumgesucht, und den
ndiswrapper schon installiert und den treiber. Wie kann ich
das jetz einstellen mit den iwconfig oder so ähnlich, bin
neuling bei linux, also ich kenn mich noch nich so aus.Hab vergessen zu Fragen, soll ich das ganze output von dmesg
reintun?
Alles und lspci -nn auch dazu.
Wenn du den ndiswrapper schon installiert hast und den Windows Treiber auch mit ndiswrapper -i wintreiber.inf geladen hast
dann zeig auch noch den output von ndiswrapper -l
Gruß Norbert
Gruß Michael
Okay dann poste ich das Zeug.
lspci -nn
00:00.0 Host bridge [Class 0600]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] [1106:0305] (rev 02)
00:01.0 PCI bridge [Class 0604]: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] [1106:8305]
00:04.0 ISA bridge [Class 0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 22)
00:04.1 IDE interface [Class 0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10)
00:04.2 USB Controller [Class 0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 10)
00:04.3 USB Controller [Class 0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 10)
00:04.4 Host bridge [Class 0600]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 30)
00:11.0 Mass storage controller [Class 0180]: Promise Technology, Inc. PDC20265 (FastTrak100 Lite/Ultra100) [105a:0d30] (rev 02)
01:00.0 VGA compatible controller [Class 0300]: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] [10de:002d] (rev 15)
dmsg
Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000011fec000 (usable)
BIOS-e820: 0000000011fec000 - 0000000011fef000 (ACPI data)
BIOS-e820: 0000000011fef000 - 0000000011fff000 (reserved)
BIOS-e820: 0000000011fff000 - 0000000012000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
287MB LOWMEM available.
Entering add_active_range(0, 0, 73708) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 73708
HighMem 73708 -> 73708
early_node_map[1] active PFN ranges
0: 0 -> 73708
On node 0 totalpages: 73708
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 543 pages used for memmap
Normal zone: 69069 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F67A0, 0014 (r0 ASUS )
ACPI: RSDT 11FEC000, 002C (r1 ASUS A7V 30303031 MSFT 31313031)
ACPI: FACP 11FEC080, 0074 (r1 ASUS A7V 30303031 MSFT 31313031)
ACPI: DSDT 11FEC100, 2BB8 (r1 ASUS A7V 1000 MSFT 100000B)
ACPI: FACS 11FFF000, 0040
ACPI: BOOT 11FEC040, 0028 (r1 ASUS A7V 30303031 MSFT 31313031)
ACPI: BIOS age (2000) fails cutoff (2001), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 20000000 (gap: 12000000:edff0000)
Built 1 zonelists. Total pages: 73133
Kernel command line: root=/dev/disk/by-id/scsi-SATA_Maxtor_91021U2_G22836EC-part2 vga=0x317 resume=/dev/sda1 splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS – you can enable it with „lapic“
mapped APIC to ffffd000 (0124d000)
Enabling fast FPU save and restore… done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 706.351 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 284136k/294832k available (1825k kernel code, 10128k reserved, 764k data, 228k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd2800000 - 0xff7fe000 ( 719 MB)
lowmem : 0xc0000000 - 0xd1fec000 ( 287 MB)
.init : 0xc038e000 - 0xc03c7000 ( 228 kB)
.data : 0xc02c86ed - 0xc0387964 ( 764 kB)
.text : 0xc0100000 - 0xc02c86ed (1825 kB)
Checking if this processor honours the WP bit even in supervisor mode… Ok.
Calibrating delay using timer specific routine… 1414.31 BogoMIPS (lpj=2828639)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking ‚hlt‘ instruction… OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Unpacking initramfs… done
Freeing initrd memory: 4019k freed
CPU0: AMD Duron™ Processor stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1140, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support…
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc2b0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc2e0, dseg 0xf0000
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 28 & 1f -> 08
PCI quirk: region e400-e4ff claimed by vt82c586 ACPI
PCI quirk: region e800-e80f claimed by vt82c686 SMB
PCI: Using IRQ router VIA [1106/0686] at 0000:00:04.0
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread D1FDAAB0 could not acquire Mutex [3] [20070126]
ACPI: RTC can wake from S4
pnp: 00:09: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:09: iomem range 0x100000-0x11ffffff could not be reserved
pnp: 00:09: iomem range 0xe8000-0xeffff has been reserved
pnp: 00:09: iomem range 0xf0000-0xf3fff could not be reserved
pnp: 00:12: ioport range 0x290-0x297 has been reserved
pnp: 00:12: ioport range 0xe400-0xe47f has been reserved
pnp: 00:12: ioport range 0xe800-0xe83f could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e0000000-e1dfffff
PREFETCH window: e1f00000-e3ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1205018661.600:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
PCI: Disabling Via external APIC routing
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xe2000000, mapped to 0xd2880000, using 4096k, total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0361
vesafb: pmi: set display start = c00c039a, set palette = c00c0410
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture…
bootsplash: silentjpeg size 78436 bytes
bootsplash: …found (1024x768, 28133 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards…
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_via 0000:00:04.1: version 0.3.1
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001d800 irq 14
ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001d808 irq 15
Clocksource tsc unstable (delta = 147989481 ns)
Time: pit clocksource has been installed.
ata1.00: ATA-5: Maxtor 91021U2, FA520S60, max UDMA/66
ata1.00: 20010816 sectors, multi 16: LBA
ata1.00: configured for UDMA/66
scsi 0:0:0:0: Direct-Access ATA Maxtor 91021U2 FA52 PQ: 0 ANSI: 5
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:11.0
scsi2 : pata_pdc202xx_old
scsi3 : pata_pdc202xx_old
ata3: PATA max UDMA/100 cmd 0x0001a400 ctl 0x0001a002 bmdma 0x00019000 irq 10
ata4: PATA max UDMA/100 cmd 0x00019800 ctl 0x00019402 bmdma 0x00019008 irq 10
thermal: Unknown symbol acpi_processor_set_thermal_limit
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:00:04.2
PCI: Sharing IRQ 5 with 0000:00:04.3
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:04.2: irq 5, io base 0x0000d400
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb1: SerialNumber: 0000:00:04.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] 20010816 512-byte hardware sectors (10246 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sd 0:0:0:0: [sda] 20010816 512-byte hardware sectors (10246 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
PCI: Found IRQ 5 for device 0000:00:04.3
PCI: Sharing IRQ 5 with 0000:00:04.2
uhci_hcd 0000:00:04.3: UHCI Host Controller
uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:04.3: irq 5, io base 0x0000d000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb2: SerialNumber: 0000:00:04.3
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: new device found, idVendor=058f, idProduct=9254
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Generic USB Hub
usb 2-2: Manufacturer: ALCOR
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 2-2.1: new full speed USB device using uhci_hcd and address 3
usb 2-2.1: new device found, idVendor=1385, idProduct=4251
usb 2-2.1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2.1: Product: WG111T
usb 2-2.1: Manufacturer: Atheros Communications Inc
usb 2-2.1: SerialNumber: 1.0
usb 2-2.1: configuration #1 chosen from 1 choice
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: BMDMA stat 0x24
ata1.00: cmd c8/00:a0:2e:84:40/00:00:00:00:00/e0 tag 0 cdb 0x0 data 81920 in
res 51/84:00:2e:84:40/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata1: soft resetting link
ata1.00: configured for UDMA/66
ata1: EH complete
sd 0:0:0:0: [sda] 20010816 512-byte hardware sectors (10246 MB)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: BMDMA stat 0x24
ata1.00: cmd c8/00:a0:16:81:40/00:00:00:00:00/e0 tag 0 cdb 0x0 data 81920 in
res 51/84:00:16:81:40/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata1: soft resetting link
ata1.00: configured for UDMA/66
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: BMDMA stat 0x24
ata1.00: cmd c8/00:a0:16:81:40/00:00:00:00:00/e0 tag 0 cdb 0x0 data 81920 in
res 51/84:00:16:81:40/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata1: soft resetting link
ata1.00: configured for UDMA/66
ata1: EH complete
ata1.00: limiting speed to UDMA/44:stuck_out_tongue:IO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata1.00: BMDMA stat 0x24
ata1.00: cmd c8/00:a0:16:81:40/00:00:00:00:00/e0 tag 0 cdb 0x0 data 81920 in
res 51/84:00:16:81:40/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
ata1: soft resetting link
ata1.00: configured for UDMA/44
ata1: EH complete
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sd 0:0:0:0: [sda] 20010816 512-byte hardware sectors (10246 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
ndiswrapper version 1.52 loaded (smp=yes, preempt=no)
usbcore: registered new interface driver ndiswrapper
Linux agpgart interface v0.102 © Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
gameport: NS558 PnP Gameport is pnp00:05/gameport0, io 0x200, speed 745kHz
rtc_cmos 00:0c: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:0c failed with error -16
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
agpgart: AGP aperture is 64M @ 0xe4000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc: VIA parallel port: io=0x378, irq=7
via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr
Adding 433712k swap on /dev/sda1. Priority:-1 extents:1 across:433712k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [email protected]
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
AppArmor: AppArmor initialized
audit(1205018676.732:2): type=1505 info=„AppArmor initialized“ pid=1443
powernow_k8: Unknown symbol acpi_processor_notify_smm
powernow_k8: Unknown symbol acpi_processor_unregister_performance
powernow_k8: Unknown symbol acpi_processor_register_performance
powernow_k7: Unknown symbol acpi_processor_notify_smm
powernow_k7: Unknown symbol acpi_processor_unregister_performance
powernow_k7: Unknown symbol acpi_processor_register_performance
acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
acpi_cpufreq: Unknown symbol acpi_processor_register_performance
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
audit(1205015135.313:3): audit_backlog_limit=320 old=64 by auid=4294967295 res=1
audit(1205015135.313:4): audit_pid=2753 old=0 by auid=4294967295
bootsplash: status on console 0 changed to on
ndiswrapper
netwg11t : driver installed
device (1385:4251) present
Gruß Michael
[Bei dieser Antwort wurde das Vollzitat nachträglich automatisiert entfernt]
Hallo,
Jetzt blinkt er und das iwconfig sagt auch etwas, wie kann ich jetzt einstellen mit welchen Netzwerk er sich verbinden soll und welcher schlüssel usw.?
Gruß Michael
Hallo,
Jetzt blinkt er und das iwconfig sagt auch etwas, wie kann ich
jetzt einstellen mit welchen Netzwerk er sich verbinden soll
und welcher schlüssel usw.?
Jetzt solltest du mit Yast oder wie das bei SuSE heißt
die Karte konfigurieren können.
Such einfach malnach in Yast nach Netzerkkarte oder so.
HTH
Norbert
Yast erkkent aber das wlanteil immer noch nicht, was kann ich da tun?
Gruß Michael
[Bei dieser Antwort wurde das Vollzitat nachträglich automatisiert entfernt]