Hallo,
Ich habe kürzlich versucht mit Hilfe von Virtual Dub Filme von der TV-Karte aufzunehmen. Als ich dann die Auflösung einstellen wollte stürzte das Programm ab. Seitdem funktioniert das Programm nicht mehr, d.h jedesmal wenn ich auf Capture Avi gehe kommt „keine Rückmeldung“ und das Programm lässt sich auch nicht mehr schließen, selbst mit dem Taskmanager nicht.
Ich habe Virtual Dub in der Version 1.4.8, Virtual Dub Mode und Virtual Dub-Mpeg2 auf dem Rechner.
Die TV-Karte ist von Aldi: Medion SAA7134 Hybrid Capture Device.
Am Rechner dürfte es nicht liegen, der ist für so was schnell genug.
Hat vieleicht jemand eine Lösung?
Mfg,
yuna
Hallo,
VirtualDub hat mit dem Phillips Chipsatz (SAA7134) Probleme.
Lässt sich aber angeblich mit einem Registry Eintrag beheben:
Philips SAA713x (Antigua) capture fix
I have been in contact with Philips regarding a problem with VirtualDub’s capture module and the drivers for the Philips SAA713x (Antigua) chip – essentially, you can get video capture to work one or two times, then the thing dies. Overlay works, but preview doesn’t, and you get zero frames trying to capture. For you coders out there, from the Video for Windows side this very simply means you get zero samples on both the video and preview callbacks. As it turns out, Philips’ staff discovered that the problem is VFWWDM driver connecting to both the Preview and the Capture pins on the Antigua capture filter. You can disable the Preview pin with the following Registry entry:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class{4D36E96C-E325-11CE-BFC1-08002BE10318}\nnnn\Parameters\CapPreviewEnabled = DWORD:00000001
nnnn is a four-digit number that varies by system – the best way to figure it out is to search for a key that is fairly unique to the driver, perhaps ADC Phase Clock Delay or VideoTunerEnabled. There should already be a bunch of other Enabled type entries in the registry key. (Note that CurrentControlSet is an alias and usually points to ControlSet001.) When you are done, reboot the system (I mean it) and then restart VirtualDub in capture mode. If the change took, the Overlay option should be grayed out. After making this change on my Windows 2000 system, capture works reliably. Full credit goes to the Antigua team for figuring this out – my role for the most part was trying a capture and responding back, „uh, yup, it doesn’t work.“
Ansonsten kannst Du auch mit Virtual VCR capturen, das soll mit dem Philips Chipsatz funktionieren. Download hier:
http://puzzle.dl.sourceforge.net/sourceforge/virtual…
weiterverarbeiten kannst Du ja dann mit VirtualDub, am besten mit der Version 1.5.10
http://puzzle.dl.sourceforge.net/sourceforge/virtual…
Gruß, Hurga